A952
6
532310 - Rev.A
2.6 UNAUTHORISED USE
-
uses other than the intended use are prohibited.
-
It is prohibited to install the automation outside
of the limits specified in the Technical Data and
Installation Requirements sections.
-
It is prohibited to install the automation system in
environments in which there is a risk of explosion
and/or fire: the presence of flammable gases or
fumes is a serious safety hazard (the product is
not ATEX certified).
-
It is prohibited to power the system with energy
sources other than those specified.
-
It is prohibited to install the A952 in marine ap-
plications.
-
It is prohibited to use the A952 in the following
conditions:
direct exposure to atmospheric agents
water jets of any type or size
outside the specified technical limitations.
-
It is prohibited to install the A952 on:
vertical movement doors
lift doors
vehicle doors
motorised doors or gates used mainly for vehicle or
goods access
doors used in industrial processes
partitions
doors that are out of people's reach (such as crane
gates and bridge cranes)
traffic barriers
turnstiles
doors next to subway / railway platforms
-
Risks related to applications other than those
intended have not been considered.
-
It is prohibited to integrate commercial systems
and/or equipment other than those specified, or
use them for purposes not intended and authorised
by their respective manufacturers.
-
It is prohibited to use and/or install accessories
which have not been specifically authorised by
FAAC S.p.A.
-
It is prohibited to use the automation before per-
forming commissioning.
-
It is prohibited to use the automation in the pres-
ence of faults which could compromise safety.
-
It is prohibited to use the automation with the fixed
and/or mobile guards removed or altered.
-
Do not allow water jets of any type or size to come
into direct contact with the operator.
-
Do not expose the door operator to corrosive
chemicals or atmospheric agents.
-
Do not enter/remain in the area of operation of the
automation while it is moving.
-
Do not try to prevent the movement of the au-
tomation.
2.4 INTENDED USE
The FAAC A952 electromechanical operator is de-
signed to operate horizontal movement pedestrian
swing doors.
The A952 is designed to motorise standard entrances,
escape routes, smoke and/or fire doors.
The A952 is suitable for indoor installation or outdoor
installation if protected from the elements.
The A952 it is considered suitable for use in countries
with a constant hot and humid climate. It can also
be used in other countries.
One operator must be installed on each leaf.
!
Any other use that is not expressly specified in these
instructions is prohibited and could affect the integri-
ty of the product and/or represent a source of danger.
2.5 APPLICATION LIMITS
FAAC transmission arms have to be used to motorise
the door (to be chosen according to the application).
The A952 is not suitable for recessed installations.
The A952 it is not suitable for installation on leaves
that incorporate pedestrian doors.
The door must fall within the size and weight limita-
tions indicated in the technical data section.
The presence of weather conditions such as snow, ice
and strong wind, even occasional, could affect the
correct operation of the automation, the integrity of
the components and be a potential source of danger
(see
§
Emergency use).
A952 is not designed to be a security (break-in pro-
tection) system.
Implementing the automation requires the installa-
tion of the necessary safety devices, identified by the
installer through an appropriate risk assessment of
the installation site.
Summary of Contents for A952
Page 1: ...EN16005 A952 EN...
Page 93: ...A952 91 532310 Rev A...