FAAC A952, Manual, Page: 44 / 94

A952 42 532310 - Rev.A
3
1
2
4
33
■
ADJUSTING THE POINT AT WHICH THE SOFT DRAW / KICK LOCK TRIGGERS
The A952 is fitted with a micro switch that determines that point at which the SOFT DRAW or KICK LOCK function
is activated (according to the setting of selector J8).
To adjust the point at which the micro switch triggers (
33
):
1. Loosen the 2 Torx screws (1) using the key (2) provided.
2. Slide the micro switch in the slot (3).
3. Tighten the screws.
4. Check the movement of the door and readjust if necessary.
L
To disable the SOFT DRAW/KICK LOCK, move the micro switch to the end of the slot as shown in
33
(factory setting).
The slot allows the stroke of the leaf to be adjusted by up to a maximum of about 40°.
The fixing screws and the spare micro switch support (4) are also supplied together with the Torx key .