EN
113
1. Stem adjustment screw
2. Stem
3. Curved section
4. Fork
Do not extend the stem beyond the safety sign, as it represents the minimum depth of insertion of
the stem into the fork.
5.4 Saddle
Insert the saddle stem into the seat holder and tighten the seat nuts. Insert the saddle stem into the frame
and adjust it to the desired height, then tighten the nut. The seat can be adjusted using the quick-release
lever. The lever is firmly fixed when it reaches a position parallel to the saddle. Recommended saddle
tightening torque: 17 Nm. When you sit on the saddle with your knees slightly bent, you should be able to
place your heels on the pedals.
1.Saddle
2.Saddl holder
3. Nut
4. Saddle stem
5. Frame
6. Quick release lever
When you sit on the saddle with your knees slightly bent, you should be able to place your heels on the
pedals.
Do not extend the saddle stem beyond the minimum insertion depth mark indicated on the tube.
The insertion depth marking must not be visible.
5.5 Lights
If you need to adjust or replace the headlight: place the headlight in the headlight holder on the handlebars
or front carrier and adjust it so that the light beam meets the ground at a distance of 10 meters in front of
the e-bike. Check the batteries' condition regularly. Don't forget the tail light. Lighting is mandatory when
used in the dark!
Always keep your lights clean and in good working order.
Summary of Contents for E-Moon Trek 28 Series
Page 4: ......
