F.F. Group CDD 7.2V EASY, Original Instructions Manual

Page: 7 / 48

English | 7
www.ffgroup-tools.com
CDD 7.2V EASY
ed battery packs. Use of any other battery packs
may create a risk of injury and fire.
f
When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a fire.
f
Under abusive conditions, liquid may be eject -
ed from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
SERVICE
Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the pow-
er tool is maintained.
SAFETY INSTRUCTIONS FOR CORDLESS DRILL
DRIVERS
f
Avoid damage that can be caused by screws, nails
and other elements in your workpiece; remove
them before you start working.
f
Always check that the supply voltage is the same as
the voltage indicated on the nameplate of the char-
ger.
f
Switch off the power tool immediately when the
tool insert jams. Be prepared for high reaction
torque that can cause kickback. The tool insert jams
when:
• the power tool is subject to overload or
• it becomes wedged in the workpiece
f
Use only accessories with an allowable speed match -
ing at least the highest no-load speed of the tool.
f
The tool/charger is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowl-
edge, unless they have been given supervision or
instruction concerning use of the tool/charger by a
person responsible for their safety.
f
Ensure that children do not play with the tool/char -
ger.
f
Hold the machine with a firm grip. High reaction
torque can briefly occur while driving in and loosen -
ing screws.
f
Secure the workpiece (a workpiece clamped with
clamping devices or in a vice is held more secure-
ly than by hand)
f
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory or fastener may contact hidden wiring
or its own cord (cutting accessory and fasteners
contacting a “live” wire may make exposed metal
parts of the power tool “live” and could give the
operator an electric shock)
f
Use suitable detectors to find hidden utility lines or
call the local utility company for assistance (contact
with electric lines can lead to fire or electrical shock;
damaging a gas line can result in an explosion; pene-
trating a water pipe will cause property damage or an
electrical shock).
f
Always wait until the machine has come to a com-
plete stop before placing it down. The tool insert
can jam and lead to loss of control over the power
tool.
f
Dust from material such as paint containing lead,
some wood species, minerals and metal may be
harmful (contact with or inhalation of the dust may
cause allergic reactions and/or respiratory diseases
to the operator or bystanders); wear a dust mask
and work with a dust extraction device when con-
nectable.
f
Certain kinds of dust are classified as carcinogenic
(such as oak and beech dust) especially in conjunction
with additives for wood conditioning; wear a dust
mask and work with a dust extraction device when
connectable.
CONNECTION TO THE POWER SUPPLY
Make sure the power supply information on the
machine’s rating plate are compatible with the
power supply you intend to connect it to.
This appliance is Class II* and is designed for con-
nection to a power supply matching that detailed
on the rating label and compatible with the plug
fitted. If an extension lead is required, use an ap -
proved and compatible lead rated for this appli-
ance. Follow all the instruction supplied with the
extension lead.
*Double insulated: This product requires no
earth connection as supplementary insu-
lation is applied to the basic insulation to
protect against electric shock in the event of
failure of the basic insulation.
LITHIUM-ION MATERIAL DATA SHEET
f
As a substance under normal conditions of use it is
not considered a hazard to health. In the event of
accidental release, measures to prevent spread must
be adhered. Do not contaminate rivers, waterways or
drains.
f
Composition of lithium-manganese, lithium-cobalt
and lithium salt as the organic solvent electrolyte
(nonaqueous liquid).
f
Hazardous Decomposition: None during normal
operating conditions. If cell is ruptured hydrogen
fluoride and carbon monoxide may be released.
PRODUCT SPECIFICATIONS
INTENDED USE
The machine is intended for driving in and loosening
screws as well as for drilling in wood, metal, ceramic
and plastic
TECHNICAL DATA
Article number 41313
Model CDD 7.2V EASY
Maximum Torque Nm 7
Revolutions Per Minute
(no load)
rpm 0-400
Chuck Capacity mm 10