F.F. Group CDD 7.2V EASY, Original Instructions Manual

Page: 9 / 48

English | 9
www.ffgroup-tools.com
CDD 7.2V EASY
ON / OFF SWITCH (image5 / element 4)
Infinitely variable speed control is possible with the
On/Off switch. The further you press the switch,
the higher the speed of the battery-powered drill/
screwdriver.
LED LAMP (image 6)
The LED lamp ( 7 ) can be used in poor lighting condi-
tions to illuminate the area where you want to drill
or screw. The LED lamp ( 7 ) will be lit automatically as
soon as you press the ON/OFF switch ( 4 ).
CHARGING INDICATOR (image 6 / element 8)
Red LED illuminate:
The battery is fully charged.
The red LED extinct:
The battery during the charging process.
CHANGING THE TOOL (image 7)
Important! Set the changeover switch (3) to its cen-
ter position whenever you carry out any work (for
example changing the tool, maintenance work, etc.)
on the cordless drill.
• The cordless drill is fitted with a quick action chuck
(5) with an automatic spindle stop.
• Open the chuck (5) . The chuck opening (a) must
be large enough to hold the tool (drill bit or screw-
driver bit).
• Select the suitable tool. Push the tool as far as pos-
sible into the chuck opening (a) .
• Tighten the chuck (5) and then check that the tool
is secure.
SCREWDRIVING
We recommend using self-centering screws (e.g.
Torx screws, recessed head screws) designed for re-
liable working. Be sure to use a bit that matches the
screw in shape and size. Set the torque, as described
elsewhere in these operating instructions, to suit
the size of screw.
HANGING BELT (image 8 / element 9)
The device has supplied with a hanging belt. You can
use the belt to hang the equipment on the wall.
CLEANING AND MAINTENANCE
Always turn off the device and pull out the battery
pack before starting any cleaning work.
CLEANING
• Keep all safety devices, air vents and the motor hous -
ing free of dirt and dust as far as possible. Wipe the
equipment with a clean cloth or blow it with com-
pressed air at low pressure.
• We recommend that you clean the device immedi-
ately each time you have finished using it.
• Clean the equipment regularly with a moist cloth
and some soft soap. Do not use cleaning agents or
solvents; these could attack the plastic parts of the
equipment. Ensure that no water can seep into the
device.
MAINTENANCE
There are no parts inside the equipment which re-
quire additional maintenance.
REPAIRS
Only use accessories and spare parts recommended
by the manufacturer. If the equipment should fail
some day in spite of our quality controls and your
maintenance, only have it repaired by an authorized
electrician. If the supply cord of the appliance is dam-
aged, this has to be done by the manufacturer or his
agent or electrician in order to avoid a safety hazard.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
as waste. Machine, accessories and pack-
aging should be sorted for environment
- friendly recycling. The plastic components
are labeled for categorized recycling.
GUARANTEE
This product is warranted in accordance with the legal/
country specific regulations, effective from the date
of purchase by the first user. Damage attributable to
normal wear and tear, overload or improper handling
will be excluded from the guarantee. In case of a claim,
please send the machine, completely assembled, to
your dealer or the service Centre for electric power
tools.