22
Set the tank volume
Command:
Set xxxxx YYY
(where xxxxx = the total litreage of the tank)
(where YYY can be litres or gallons)
The system responds with:
The tank volume has been set to xxxxx YYY
(where YYY is either litres or gallons)
Set alarm levels
Both low and high alarm levels can be set, the unit will text you when the level has been
reached.
Command: Set xxxx litres yyy alarm
(where xxxx is the litres, yyy is either low or high)
OR
Command: Set xxxx gallons yyy alarm
(where xxxx is the litres, yyy is either low or high)
The system responds with:
The tank yyy alarm level has been set to xxxx, and the alarm has been turned On
(where yyy will be either low or high depending on the above)
Set alarm reset levels
Both low and high alarm levels can be reset automatically when the tank level reaches the
programmed reset levels.
Note: If the reset level is not set the default alarm reset level will be 10% great than the
low alarm set level and 10% less than the high alarm level.
Command: Set xxxx litres yyy alarm reset
OR
Command: Set xxxx gallons yyy alarm reset
(where xxxx is the litres/gallons, yyy is either low or high)
The system responds with:
The automatic alarm reset level has been set to xxxx litres or gallons
Turning tank alarms On / Off
The tank alarms can be turned On or Off.
Command: Tank xxxx alarm yy (xxxx can be the word low or high : yy can be on or off)
e.g Tank high alarm off
The system responds with:
The alarm has been turned yy, (where yy can be on or off)
Linking alarms to outputs
Both low and high alarm can be linked to an output.
Command: Link xxxx alarm to
OUTPUT NAME
(xxxx can be the word low or high)
OUTPUT NAME
= the name of the output
The system responds with:
The tank xxxx alarm has been linked to
OUTPUT NAME
(where xxx will be either low or high depending on the above)
Ezy Switch SMS-T4 Installation & Operation
Manual
