2
Table of Contents
COMMANDS
Getting Started
– Setting Up Initial User
7
Adding a User
8
Removing a User
8
Adding an Administrator
8
Removing the Administrator
9
Get a list of all the Users
9
Turn programmed numbers lookup on or off
9
Text all programmed numbers on or off
9
Turn All Texts OFF and Disable Inputs
10
Turn All Texts ON and Enable Inputs
10
Testing
10
Get a List of the Inputs
10
Get a List of the Outputs
10
Naming Inputs/Outputs and Changing Names
11
Change the Input Delays
11
Change Input to Normally Open or Normally Closed
12
Set Input as a latched Input
12
Set Input as a non-latched Input
12
Reset latched Input
12
Masking Inputs
12
Link an Input to an Output
13
Get linked information
13
Setup Input Tick off
13
Programming the Input reply message
14
Turn an Output ON or OFF
15
Turn an Output ON for a set time
15
Invert Output
15
Make an Output Pulse On and Off
16
Clear Output Pulse (Set to non-pulsed)
16
Turn Output response On / Off
17
Save Output Status
17
Linking Outputs
17
Set Battery Alarm trigger voltage
18
Link Battery Alarm to Output
18
Check Battery Supply Voltage
18
Fire System
18
Latching / Non-latching battery alarm
19
Reset Latched Battery Alarm
19
Alive text
20
Setting Input Priority’s
20
Setting Tank information
21-23
Get Firmware Version
23
Resetting Unit
23
Get Signal Strength
23
Reset Unit to Factory Defaults
23
Warranty
24
Appendix One
Table of User Selected Input and Output Names
25
Detailed Explanation of Input Delays
25
Trouble Shooting Guide
26
Appendix Two
SMS-T4 Setup tank to pump (Application Notes)
27
