13
Link an Input to an Output
Command:
Link INPUT NAME to OUTPUT NAME
(Example: Link alarm to siren)
The system responds with:
The INPUT NAME has been linked to OUTPUT NAME
To clear a link
Command:
Clear INPUT NAME link (Example: Clear alarm link)
The system responds with:
The link between INPUT NAME and OUTPUT NAME has been cleared
Function:
If a link is setup between an Input and an Output and the Input is turned ON, the
Output will also turn on. Full control of the Output is still available.
Get Linked infomation
Command:
Link status
The system responds with:
Which inputs are linked to which outputs
Input Tick Off Feature.
The inputs can have a Tick-Off feature, if this feature is turned on and an input is on
the unit will send a reminder text every 5 minutes until the text command “Tick INPUT
NAME off is sent. (max number of texts=20)
To turn the feature on:
Command:
Make INPUT NAME tickoff on
If everything is fine, the system responds with:
The input tickoff feature has been turned on
To turn the feature off:
Command:
Make INPUT NAME tickoff off
If everything is fine, the system responds with:
The input tickoff feature has been turned off
To Tickoff an input
Command:
Tick INPUT NAME off
If everything is fine, the system responds with:
The input has been ticked off
NOTE: If the input is a latched input sending the tickoff will NOT reset the latch, the
command Reset input name will need to be sent.
Ezy Switch SMS-T4 Installation & Operation
Manual
