14
Programming the Input reply message.
All inputs can have a programmed reply message feature, if this feature is
programmed then when the input is triggered (turned on) you will receive the
programmed message. And when the input is turned off
NO
message will be sent
The programmed message can have up to 6 words and a maximum of 10 characters per word:
e.g Turn the back paddock pump on
e.g Please close the gate after using
To program the feature:
The Command for Input1 is:
Message1 please close the gate after using
The Command for Input2 is:
Message2 please close the gate after using
The Command for Input1 is:
Message3 please close the gate after using
The Command for Input2 is:
Message4 please close the gate after using
If everything is fine, the system responds with:
The reply message has been set to :
please close the gate after using
To turn the feature off and set back to factory settings simply send:
The Command for Input1 is :
Message1
The Command for Input2 is :
Message2
The Command for Input1 is :
Message3
The Command for Input2 is :
Message4
If everything is fine, the system responds with:
The reply message has been set back to the factory settings
If the message is wrong, the system responds with:
Sorry that message is not allowed, please check that each word is between 1 and 10
chartacters long
Ezy Switch SMS-T4 Installation & Operation
Manual
