Supervisor setting Functions
13
12
These functions are used to customize some product functions in the user’s environment.
User Setting Functions
Operation
Chapter
2
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the standby mode, press the SET button repeatedlly to select the 5.ALL IMAGE DELETE.
2. Press the + / - buttons to select the YES or NO.
YES: perform the deleting all images NO: cancel the deleting all images
3. To excute the selected condition, press the Interphone button.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
▶
▶
Deleting all stored images
•
To exit the user setting mode, select
F.EXIT
, and then press the
Interphone
button to save your settings.
In addition, if there is no input for more than 10 seconds, the mode is automatically ended.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the standby mode, press the SET button repeatedlly to select the 6. FACTORY DEFAULT.
2. Press the + / - buttons to select the YES or NO.
Yes: Perform the initialization
No: Cancel the initialization
3. To excute the selected condition, press the Interphone button.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
▶
▶
System initialization
•
To exit the user setting mode, select
F.EXIT
, and
then press the
Interphone
button to save your
settings.
In addition, if there is no input for more than 10
seconds, the mode is automatically ended.
•
Default setting values
- Door 1 melody: Ding-dong 1
- Door 2 melody: Ding-dong 2
- Slave melody: Ding-dong 3
- Voice volume/melody volume: 2 levels
- Color/Contrast/Brightness: 2 levels
- EVR: Deletion of all images
- RTC: 2009/01/02/03/04
1. Remove the J1 Jumper on the SHT-3305’s buttom to enter supervisor mode.(refer to 29 page)
2. Press the SET button to select a desired supervisor setting item.
3. Press + / - button to select the value for selected setting item.
< SUPERVISOR MODE >
1. ID SET
MASTER
2. CAMERA QUANTITY
1
3. BELL SET
RELEASE
4. MELTI LOBBY SET
RELEASE
5. DOOR1 OPEN SET
MAIN
6. DOOR2 OPEN SET
MAIN
7. DOOR1 OPEN TIME SET
1SEC
8. DOOR2 OPEN TIME SET
1SEC
9. DOOR1 CALL TIME SET
1MIN
A. DOOR2 CALL TIME SET
1MIN
B. SLAVE CALL TIME SET
1MIN
C. DOOR1 TALK TIME SET
3MIN
D. DOOR2 TALK TIME SET
3MIN
E. SLAVE TALK TIME SET
3MIN
M. NAND BULK ADJUST
NO
N. VIDEO MODE SELECT
NTSC
O. SUPERVISOR DEFAULT
NO
Q. CHROMA DELAY
1SEC
R. STORAGE IMAGE
128
SLAVE3
DOOR1
DOOR2
LOCK2
LOCK1
SLAVE2
SLAVE1
JTAG1
BELL_1
UART1
J1
OFF
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.------.--.-
---.----.---.-.-...---.-.
-.-.---.--.-.----.-----.
▶
▶
Entering for supervisor setting mode
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select 1.ID SET.
2. Press the + / - buttons repeatedlly to select the Master, Slave 1, Slave 2 or Slave 3.
3. Press the Interphone button to stored your setting, then exit.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
▶
▶
Setting the ID
Set to the Master or Slave mode, and select to Slave’s ID.
•
After connecting to the slave unit, be sure to set the SLAVE ID without overlap.
Do not overlap the SLAVE ID when multi-units are connected, it may cause malfunction of the master or the slave unit.
•
To save and exit the your settings, press the
Interphone
button.
In addition, if there is no input for more than 10 seconds, the setting mode is automatically ended.
These functions are used to customize some product functions in the user’s environment.
Summary of Contents for SHT-330XM/EN
Page 1: ...GC68 00874A ED 01...
