Troubleshooting
31
30
The product packages are as shown in the figure below. Check they contain all components.
Components
Jumper
1EA
Jumper
1EA
EXT Harness 1EA
Mount Bracket Screw 2EA
EXT Harness 2EA
(for Door Lock)
EXT Harness 2EA
(for Door Phone)
EXT Harness 3EA
(for Interphone)
▶
▶
Household unit
[SHT-3305 Series]
▶
▶
Door Camera
[SHT-CP601/EN, SHT-CP611/EN, SHT-CP611E/EN]
Useful Information
Chapter
4
Mount Bracket
1EA
Mount Bracket
1EA
Mount Bracket Screw
2EA
Mount Bracket Screw
2EA
Ext. Harness 6Pin
1EA
Ext. Harness 6Pin
1EA
Jumper
1EA
Jumper
1EA
Interphone
1EA
Interphone
1EA
▶
▶
Interphone
[SHT-IPE200/EN]
4 Pin for Door Camera
2 Pin for Camera Door Lock
(SHT-CP611E/EN model only)
▶
▶
Check This First!
The power does not turn on.
●
Make sure if the power is connected.
The screen is too dark.
●
Check the condition of the exterior lighting in the area of the camera.
●
Clean the exterior surface of the door camera.
●
Adjust the screen brightness in the function settings. (refer to page 11)
The screen brightness settings consist of 4 phases and factory default set is 2.
There is too much noise during calls.
●
Check to see if the door phone line has been short-circuited with the ground.
Calls are not audible.
●
Check the volume setting.
●
Check the wire connection between the monitor and the camera.
Summary of Contents for SHT-330XM/EN
Page 1: ...GC68 00874A ED 01...
