Ezon SHT-330XM/EN, User Manual

Page: 7 / 19

11 10
▶ ▶ Entering for user setting mode
These functions are used to customize some product functions in the user’s environment.
User Setting Functions
1
Select a desired setting mode by repeated pressing the SET button in standby mode.
Press +/- button to enter the selected mode.
SHT-3305XM
These functions enable you to make internal calls when
another monitor or an interphone is installed.
• To exit the user setting mode, select
D.EXIT
, and then press the
Interphone
button to save your settings.
In addition, if there is no input for more than 10 seconds, the mode is automatically ended.
Operation
Chapter
2
-.---.-.-.-----.---.-.-.
---..-.---.-..---.------.--.-
---.----.---.-.-...---.-.
-.-.---.--.-.----.-----.
< USER MODE >
1. DOOR1 MELODY SELECT 1
2. DOOR2 MELODY SELECT 2
3. SLAVE MELODY SELECT 3
4. MELODY VOLUME ADJUST 2
5. ALL IMAGE DELETE NO
6. FACTORY DEFAULT NO
7. VIDEO MODE OSD COLOR RED
8. RTC YEAR ADJUST 2009
9. RTC MONTH ADJUST 01
A. RTC DATE ADJUS 02
B. RTC HOUR ADJUST 03
C. RTC MIN ADJUST 04
D. EXIT
Ver1.0
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the standby mode, press the SET button repeatedlly to select 8.RTC YEAR ADJUST ~ C.RTC MIN
ADJUST.
2. Press the + / - or SET buttons to adjust the desired time.
+ : Increase the setting value - : Decrease the setting value
SET: Move to the specified item. (Move to YEAR → MONTH → DAY → HOUR → MIN in turn.)
3. To save the selected settings, press the Interphone button.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
▶ ▶
Setting the time
•
To exit the user setting mode, select D.EXIT , and then press the Interphone button to save your settings.
In addition, if there is no input for more than 10 seconds, the mode is automatically ended.
•
If the unit power is off for more than 5 minites, the RTC settings will are reset automatically.
SHT-3305XM
1. While an image is displayed on the screen, press the SET button repeatedlly to select the desired
adjustment mode as below;
TALK VOLUME 2 → COLOR STEP 2 → CONTRAST STEP 2 → BRIGHT STEP 2 → EXIT.
2. Press the + / - buttons to select the desired value.
+ : Increase the setting value - : Decrease the setting value
• Each setting can be set up to level 4, and the initial setting value is 2.
3. To save the selected settings, press the Interphone button.
SHT-3305XM
▶ ▶ Adjusting the voice volume/screen
• To exit the user setting mode, select
EXIT
, and then press the
Interphone
button to save your settings.
In addition, if there is no input for more than 10 seconds, the mode is automatically ended.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the standby mode, press the SET button repeatedlly to select the desired melody selection item.
(1.DOOR1 MELODY SELECT ~ 3.SLAVE MELODY SELECT)
2. Press the + / - buttons to select the desired melody type as below;
1. Ding-dong 1 2. Ding-dong 2 3. Ding-dong 3 4. Guitar bell 1
5. Guitar bell 2 6. Love’s greeting 7. Tambourine 8. Canon (Pachelbel)
3. To save the selected settings, press the Interphone button.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
▶ ▶
Setting the melody type
•
Melodies can be repeatedly selected for each bell sound of Door 1, Door 2 (Lobby) and Slave (Interphone).
•
To exit the user setting mode, select D.EXIT , and then press the Interphone button to save your settings.
In addition, if there is no input for more than 10 seconds, the mode is automatically ended.
Set/select melodies for Door 1, Door 2 (Lobby) and/or Slave (Interphone).
TALK VOLUME 2