17
16
These functions are used to customize some product functions in the user’s environment.
Supervisor setting Functions
Operation
Chapter
2
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select 7.DOOR1 OPEN TIME
SET or 8.DOOR2 OPEN TIME SET.
2. Press the + / - buttons repeatedlly to select the desired time (1SEC ~ 10SEC).
3. Press the Interphone button to store your setting.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
Set to the door lock open time for the Door1/2 port’s door open function.
•
After connecting to the door lock to the DOOR1/2 port, be sure set to the door open time on the 7/8.DOOR1/2 OPEN TIME
item. Do not set to the DOOR1/2 OPEN TIME correctly, the door lock’s open function can not used.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select the 9.DOOR1 CALL TIME
SET, A.DOOR2 CALL TIME SET or B.SLAVE CALL TIME SET.
2. Press the + and - buttons repeatedlly to select the desired time (15SEC ~ 10MIN).
3. Press the Interphone button to store your setting.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
▶
▶
Setting the Call Time
Set to the each call time limit for the Door1/2 or slave port’s.
•
After connecting to the DOOR1/2 or SLAVE port, be sure set to the call time limit on the 9/A.DOOR1/2 CALL TIME
SET and B.SLAVE CALL TIME SET item.
•
If a call is not made within the DOOR1/2’s call time limit, the visitor’s image is recorded/stored automatically.
▶
▶
Setting the Open Time
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select the C.DOOR1 TALK TIME
SET, D.DOOR2 TALK TIME SET or E.SLAVE TALK TIME SET .
2. Press the + / - buttons repeatedlly to select the desired time (30SEC ~ 1HOUR).
3. Press the Interphone button to store your setting.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
Set to the each talk time limit for the Door1/2 or slave port’s.
•
After connecting to the DOOR1/2 or SLAVE port, be sure set to the talk time limit on the C/D.DOOR1/2 TALK TIME
SET and E.SLAVE CALL TIME SET item.
•
When the DOOR1 port is connected to door bell, the C.DOOR1 TALK TIME SET is not activated.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select the M.NAND BULK
ADJUST.
2. Press the + and - buttons repeatedlly to select the YES or NO.
Yes: Activate the NAND flash bulk check function
No: Disable the NAND flash bulk check function
3. Press the Interphone button to store your setting.
•
If the M.NAND BULK ADJUST set to YES, the unit will be start NAND flash bulk checking
for more than 7 minutes.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
▶
▶
Setting the NAND Flash Bulk Check
Set to the NAND flash bulk check function enable or disable.
▶
▶
Setting the Talk Time
Summary of Contents for SHT-330XM/EN
Page 1: ...GC68 00874A ED 01...
