1
21
20
▶
▶
Auto-recording of missed visitor images
These functions are used to record/store visitor images
Visitor Image Functions
1
If a call by a visitor is disconnected by not answering
the call within CALL TIME by supervisor setting, the
visitor’s image is recorded/stored automatically.
•
The recorded/stored images can be replayed/checked/
deleted in visitor image replay mode.
•
The calling visitor's images are automatically recorded/stored in absent status or during sleeping time.
SHT-3305XM
▶
▶
Auto-recording of door camera stolen
1
Ambient images that the camera installed in the entrance
was facing at the moment when the camera is deviated or
detached from the normal position are recorded/stored with
warring bell.
•
To stop the warring bell, press and hold the
Interphone
button
for more 2 seconds. (In case of IPE200 model : press and hold the
Open
button for more 2 seconds in the standard mode)
•
•
For return to tamper activation after tamper’s detection
Be sure release to tamper’s stop mode and reconnect to camera,
then reset the power.
•
This function is applied only when SHT-611E/EN equipped with a tamper switch for camera anti-theft is installed.
▶
▶
Recording visitor images manually
When an image is displayed on the screen,
the screen image can be recorded/stored at
any time by pressing the Record/Replay
button.
•
Visitor images are manually recorded/stored when the images are displayed on the screen.
▶
▶
Replaying stored images
1
The stored images can be
replayed by pressing the Record/
Replay button in standby mode.
2
The next image can be replayed by
pressing the + and - buttons in
image replay mode.
SHT-3305XM
•
If no image is stored, the text showing “
No Image
” is displayed on the screen.
▶
▶
Deleting the current image
1
The current image can be deleted by pressing
Interphone button in image replay mode.
SHT-3305XM
SHT-3305XM
Operation
Chapter
2
Summary of Contents for SHT-330XM/EN
Page 1: ...GC68 00874A ED 01...
