19
18
These functions are used to customize some product functions in the user’s environment.
Supervisor setting Functions
Operation
Chapter
2
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select the O.SUPERVISOR
DEFAULT. .
2. Press the + / - buttons repeatedlly to select the YES or NO.
Yes: Perform the initialization
No: Cancel the initialization
3. Press the Interphone button to store your setting.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select the Q.CHROMA DELAT.
2. Press the + and - buttons repeatedlly to select the desired time (1SEC ~ 3SEC).
3. Press the Interphone button to store your setting.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
▶
▶
Setting the Chroma Delay
Set to the Chroma delay time for image displaying.
▶
▶
Initializing the Supervisor mode
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select the R.STORAGE IMAGE
NUM.
2. Press the + and - buttons repeatedlly to select the desired number (32, 64, 128 or 333).
3. Press the Interphone button to store your setting.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
▶
▶
Setting the Stroge Image Number
Set to the number of stroge image.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select the N.VIDEO MODE
SELECT.
2. Press the + / - buttons repeatedlly to select the NTSC or PAL.
3. Press the Interphone button to store your setting.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
Set to the video signal scanning type for door camera1/2.
•
After connecting to the DOOR1/2 port to camera (lobby), be sure set to the camera’s video signal scanning type on the
N.VIDEO MODE SELECT item.
•
When the DOOR1 and DOOR2 port are connected to cameras, the both camera device’s video signal type are same mode,
otherwise display will be abnomal
▶
▶
Setting the Video mode
•
Supervisor Default setting values
- ID
MASTER
- Camera Quantity
1
- Bell set
Release
- Melti lobby
Release
- Door1 open
Main
- Door2 Open
Main
- Door1 open time
1sec
- Door2 open time
1sec
- Door1 call time
1min
- Door2 call time
1min
- Slave call time
1min
- Door1 talk time
3min
- Door2 talk time
3min
- Slave talk time
3min
- Nand bulk adjust
no
- Video mode
NTSC
- Indicate LED
OFF
- Chroma dealy
1sec
- Storage image num 128
- EVR rimage
ALL clear
•
After set to the R.STORAGE IMAGE NUM, the stored all images are deleted.
Summary of Contents for SHT-330XM/EN
Page 1: ...GC68 00874A ED 01...
