EZ Answer
The
EZ ANSWER
may be wall mounted or kept on the tabletop.
The unit has wall-mounting eyelets on the bottom of the unit,
centered on 3.0 inch spacing.
The
EZ ANSWER
has a Volume Level adjust control on the rear
panel of the unit, for adjusting the output level of the voice
message played back to the caller. The control is common for
both the ports.
The EZ ANSWER does not need any batteries to retain its VOICE
MESSAGES or the Program Parameters, since both are stored in
Non-volatile memory.
The EZ ANSWER is a Plug-n-play product, which can be put to
use with a minimum of programming. It comes with default
parameters and default voice messages programmed in the unit,
which will be adequate for most installations. At some places,
the extension lengths and hook flash timings may need to be
programmed to get the unit to work properly,
The EZ ANSWER is completely remote programmable.
Installation
Unpack the unit from its shipping carton and check that all the
materials have been received in good condition. Any damages or
shortfalls must be reported immediately to the distributor from
whom the purchase was made.
Your
EZ ANSWER
shipping carton must contain :
The
EZ ANSWER
Auto Attendant
User Manual
Wall Adapter
Modular cable(s)
5
