EZ Answer
Delay period after Hook Flash -
This value determines the delay period after hook flashing and
before dialing the digits for transferring a call.
Enter
205 n
where
n = 0
to
9
n
x 0.5 sec
gives the total
delay period.
*
and
#
are Invalid entries.
Default value =
2
Length of entry = fixed 1 digit
If this value is too small, the PBX will miss one or more of the
digits dialed by the unit for transferring the call.
Program # 245:
To listen to the currently programmed value for the Delay after
Hook Flash -
You will hear:
“ Two Four Five (0.6 sec silence) Two”
Program # 206:
Number of rings to wait before deciding there is NO ANSWER
from that extension:
When an incoming call is transferred to an extension in the
fully
supervised
mode, the unit waits to see if that extension is
answered or not. If the extension returns a ring signal, the unit
will wait for 3 rings (max. 9 rings) before deciding that there is
no answer at that extension.
If the extension is
busy
or if a
re-order (fast busy)
signal is
29
