EZ Answer
To listen to the currently programmed value for the Operator
extensions -
You will hear: “ One Five Zero ”
The
#
at the end is not prompted.
Program # 201:
Conflict Timer: If the single digit dialing plan has been enabled
for a digit, and if that is the first digit dialed by the caller, the
`conflict timer'
value will decide how long the unit will wait for
the caller to press another digit before transferring as per the
single digit plan. If another digit is entered within this waiting
period, the single digit plan will be ignored.
If the dialing plan has not been enabled for the first digit dialed
by the caller, the unit will wait for the caller to enter a valid
extension.
Enter
201 n
where
n = 2, 3,4
or
5 n =
wait-period in seconds.
If any other value is entered, the unit will prompt the message
“This entry is invalid”.
Default value =
2
Length of entry = fixed 1 digit
Program # 241:
To listen to the currently programmed value for the Conflict
timer -
You will hear: “ Two Four One (0.6 sec silence) Two”
Program # 202:
26
