EyeView IPS-H110, Hardware Installation Manual, Page: 42 / 44

(7) MOTION DETECTION SET
7.1 DETECTION Mode Set:
MENU
.
MOTION DET
.
.
.
MOTION
DETECTION ON
.
.
.
.
.
MOTION
MOTION OFF
.
.
.
.
.
A) Set “MOTION” in main menu using Protocol command or Demo Software.
B) Select the “DETECTION” in submenu using Tele/wide Command.
C) Set the mode to ON, OFF using Near/Far Command.
7.2 LEVEL ADJUST Set:
This function is available for DETECTION ON mode.
MOTION
.
LEVEL SET ##
.
.
.
MOTION
.
LEVEL SET -------------
.
.
.
A) Select the “LEVEL SET” in submenu. Using Tele/wide Command,
B) Adjust the level to some sensitivity.
* ##: Current value in motion detection ON mode.
7.3 INITIAL SET:
If initial mode set to ON, al MOTION functions are changed to the factory setting
MOTION
.
INITIAL SET ON
.
.
.
.
MOTION
.
INITIAL SET OFF
.
.
.
.
A) Select the “ININTIAL SET” in submenu using Tele/wide Command.
B) Set the initial set mode to ON or OFF using Near/Far Command.
7.4 RETURN TO MAIN MENU:
This function is exit to main menu.
MOTION
.
RETURN
A) Select the “RETURN” in submenu using Tele/wide Command.
B) Set the return mode using Near/Far Command.