EyeView IPS-H110, Hardware Installation Manual, Page: 36 / 44

4.7 E. SENSITIVITY SET:
AE AE
. .
E.SENSITIVE OFF E.SENSITIVE X32 Auto .
. .
. .
A) Select the “E.SENSITIVITY” in submenu using Tele/wide Command.
B) Select the sensitivity mode what you want in submenu. Using Near/Far Command
* Mode sequence: OFF-X2 AUTO-X4 AUTO-X8 AUTO-X10AUTO-X16 AUTO- X32 AUTO
-OFF- X2 FIX-X4 FIX -X8 FIX -X10 FIX -X16 FIX - X32 FIX-OFF
4.8 INITIAL SET:
If initial mode set to ON, all AE function is changed to the factory setting
AE
.
INITIAL SET ON
.
.
.
.
AE
.
INITIAL SET OFF
.
.
.
.
A) Select the “ININTIAL SET” in submenu. Using Tele/wide Command.
B) Set the initial set mode to ON Using Near/Far Command
4.9 RETURN TO MAIN MENU:
This function is exit to main menu.
AE
.
RETURN
A) Select the “RETURN” in submenu using Tele/wide Command.
B) Set the return mode using Near/Far Command.