EyeView IPS-H110, Hardware Installation Manual, Page: 37 / 44

(5) BACKLIGHT
5.1 BACKLIGHT Set:
BACKLIGHT
BACKLIGHT OFF
.
.
.
BACKLIGHT
.
BACKLIGHT ON
.
.
.
BACKLIGHT
.
BACKLIGHT AUTO .
.
.
A) Select the “BACKLIGHT” in submenu. Using Tele/wide Command,
B) Set the mode OFF, ON, or AUTO using Near/Far Command.
* Auto BLC (Auto back light compensation)
When a backlight condition occurs in area1, area2, area3, or area4,
the back light compensation is enable automatically.
When the back light condition disappears in that area,
BLC is disabled automatically. If you do not want this mode, please set to OFF.
Area 1
Area 2
Area 0
Area 3
Area 4
5.2 BACKLIGHT LEVEL Set:
BACKLIGHT
BLC LEVEL 00
.
.
.
BACKLIGHT
.
BLC LEVEL 32
.
.
.
BACKLIGHT
.
BLC LEVEL 80.
.
.
A) Select the “BLC LEVEL” in submenu using Tele/wide Command.
B) Adjust the level from 0 to 80 using Near/Far Command.