EyeView IPS-H110, Hardware Installation Manual, Page: 38 / 44

. .
5.3 WDR SET:
BACKLIGHT
.
WDR CONTROL OFF
.
.
BACKLIGHT
.
WDR CONTROL ON
.
.
BACKLIGHT
.
WDR CONTROL AUTO.
.
.
A) Select the “WDR CONTROL” in submenu using Tele/wide Command.
B) Select the WDR mode what you want in submenu. Using Near/Far Command
* Mode sequence: OFF-- ON -- AUTO
* WDR Auto mode is working at the condition of high light back light.
5.4 WDR LEVEL ADJUST Set:
This function is the gain adjustment of WDR
BACKLIGHT
.
SENSITIVITY ##
.
.
.
BACKLIGHT
.
SENSITIVITY -------------
.
.
.
A) Select the “SENSITIVITY” in submenu using Tele/wide Command.
B) Adjust the level to some sensitivity using Near/Far Command.
* ##: Current value of SENSITIVITY is before setting value.