EyeView IPS-H110, Hardware Installation Manual, Page: 23 / 44

Operation Setup Info. For KB3000 In Eyeview Protocol Speed Dome
P.S. These functions are only available to KB3000
Select to Control the Speed Dome Camera:
Enter: CAM + NNN + ENTER
Display: Cur CamID : NNN
NNN: Users may enter one number from Number 0 ~255 as the number of the
speed dome cameras. The speed dome camera you select to control appears on
the LCD screen after one number is entered.
1. Set up the Speed Dome Preset Points:
A. Enter: SET + NN + ENTER
B. Display: Preset No : NNN
C. NNN: Users may enter one number from Number 1 ~ 64 as preset points
number.
D. Operation: Move the speed dome to the location you want to set up and set the preset point based on the method used
for Point A. The operation method applies to other preset points setting.
Call the Speed Dome Preset Points:
Enter: PRESET + NN + ENTER
Display: CALL Number : NN
NN: Preset points, No. 1~64
3. Delete the Speed Dome Preset Points:
Description: This function is designed to clear the preset points by following the
operation procedure:
Enter: DELETE + NN + ENTER
Display: DELETE Number : NN
NN: Preset points to be deleted, No. 1~64
4. Set up Preset Point Group: (Do not apply to PELCO Protocol)
Description: This function is designed to scan the preset points in order. Each
group is allowed to set up 16 preset points for the moving speed and retention time.
Enter: SHOT + N + ON
If you choose EYEVIEW Protocol for one of our speed dome cameras, you may
set up 4 preset point groups by following the operation procedure:
A. Press [ SHOT ] :
LCD displays: SHOT NO: 0
Enter the preset point groups, No. 1-4, and press the ON key.
LCD displays: Track: 1 Sum: 1