EyeView IPS-H110, Hardware Installation Manual, Page: 31 / 44

2.3 ZOOM START Set:
This function is for selection of zoom start position.
FOCUS SET
.
ZOOM START X1
.
.
.
.
FOCUS SET
.
ZOOM START X16
.
.
.
.
FOCUS SET
.
ZOOM START X26
.
.
.
.
A) Select the “ZOOM START” in submenu. Using Tele/wide Command,
B) Set the Zoom start mode from x1 to x26.
2.4 ZOOM END Set:
This function is for selection of zoom end position.
FOCUS SET
.
ZOOM END X270
.
.
.
.
FOCUS SET
.
ZOOM END X27
.
.
.
.
FOCUS SET
.
ZOOM END X18
.
.
.
.
A) Select the “ZOOM END” in submenu. Using Tele/wide Command,
B) Set the Zoom end mode from x2 to x270.
Caution 1) This value must be always larger than “ZOOM START”.
Caution 2) The Maximum value of this is changed according to Max Digital Zoom Power.
2.5 ZOOM SPEED Set:
This function is for selection of zoom speed.
FOCUS SET
.
ZOOM SPEED SLOW
.
.
.
.
FOCUS SET
.
ZOOM SPEED MIDDLE
.
.
.
.
FOCUS SET
.
ZOOM SPEED QUICK
.
.
.
A) Select the “ZOOM SPEED” in submenu. Using Tele/wide Command,
B) Set the Zoom speed, slow, middle, quick.
2.6 ZOOM TRACKING MODE Set:
This function is for selection of zoom tracking mode and available for Manual Focus or Push-Auto Mode.
FOCUS SET
.
ZTRK MODE ON
.
.
.
.
FOCUS SET
.
ZTRK MODE OFF
.
.
.
.
A) Select the “ZTRK” in submenu. Using Tele/wide Command,
B) Set the Zoom tracking mode to ON or OFF.
*Zoom tracking means focused zooming state.