EyeView IPS-H110, Hardware Installation Manual, Page: 30 / 44

3) SUB MENU DESCRIPTIONS
(1) CAM ID
MENU1
CAM ID OFF
.
.
.
.
.
MENU1
CAM ID 1
.
.
.
.
.
CAM ID: To connect a large number of cameras. It can be assigned to identification number to each
camera for camera control easily (000 ~ 255: total numbers of ID are 256.)
* It only can be set this function using ID commend.
To transfer ID Code of camera, In first byte at PC control.
Set the ID number of camera, And then the ID number display continuously.
(2) FOCUS SET
2.1 Focus Mode Set:
This function is for focus mode setting
MENU
.
FOCUS SET
.
.
.
FOCUS SET
FOCUS MODE Auto
.
.
.
.
.
FOCUS SET
FOCUS MODE Push Auto
.
.
.
.
.
FOCUS SET
FOCUS MODE Manual
.
.
.
.
.
A) Set up “FOCUS SET” in main menu using Protocol command or Demo Software. Select the
“FOCUS MODE” in submenu. Using Tele/wide Command, and then set the mode “auto, push
auto, manual.”
2.2 Focus Distance Set:
This function is for selection of minimum shooting distance.
FOCUS SET
.FOCUS DIST 50cm
.
.
.
.
FOCUS SET
.
FOCUS DIST 10cm
.
.
.
.
FOCUS SET
. FOCUS DIST 5M
.
.
.
.
A) Select the “FOCUS DIST” in submenu. Using Tele/wide Command,
B) Set the focus distance mode from 1cm to 5M.