2.4.1
Connect the housing to the mount
Insert the cable from the housing through the hole. There’s some
lubricating oil inside the tube, thus the cable would have some oil on it
once inserted through the Tube.
Then take out M6 screws and hexagonal wrench provided within the
package and fasten the 4 screws as pictue below.
Connect the housing cable to the board in the junction box
Connect the junction box to respective apparatus.
Please refer to Page 7 for how to connect.
Summary of Contents for IPS-H110
