Extron electronics NAV E 101 DTP, User Manual

Page: 36 / 78

NAV E 101 DTP Encoder • HTML Operation 28
On Screen Display (OSD) pane
See figure 19. This pane shows the options for the OSD and screen saver on the HDMI
Output port (see
B
on page 6) and streamed outputs. If you change any setting, either
directly or by clicking RESET (
7
), the SAVE button (
5
) becomes selectable. Click SAVE
to take change or CANCEL (
6
) to abandon the changes. Clicking either button closes the
dialog box.
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
3
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Figure 19. OSD Configuration Pane
1
OSD Type — Click the drop-down list to select among the OSD
options (see figure 20 on page 29 for on-screen typical displays).
• Input OSD (input connection details that can alert users of an
input change)
• Status OSD (general encoder details)
•
Disabled (no OSD)
NOTE
: When Input OSD or Status OSD is selected, an extra control,
OSD Duration appears below OSD Type .
Click or to increment or decrement the duration (from 1 to 500 in seconds) of
how long the OSD stays active or 501 Always on .
2
Screen Saver Mute — Click to toggle the Screen Saver Mute on (muted) and off
(unmuted) for the HDMI Output port (see
B
on page 6) and streamed outputs. This
control sets whether the screen immediately enters low power mode ( Screen Saver
Mute is off) upon loss of sync or displays the user-entered background image (see
Background Image,
4
on page 29) for a period of time set by the Screen Saver
Duration setting,
3
.
NOTE:
Allow Audio Only
(see
4
, Allow Audio only on page 25) must be
disabled to use a screen saver.
3
Screen Saver Duration (available when Screen Saver [
2
] is selected) —
(see figure 19 on page 27) Click in the Duration field and edit it as desired
or click or to increment or decrement the delay (in seconds) of how long the
screen saver stays active and streaming, before muting sync to a display. The valid
range is from
1 to 500 (seconds) or 501 Always on .
When Screen Saver Mute is unchecked (
2
), the duration automatically becomes
501 Always on
.
After the duration expires, the encoder drops the active sync, allowing the monitor to
turn off or enter low power mode.