3-39
MVX Plus 128 VGA A Matrix Switcher • Operation
PRELIMINAR
Y
Example 11: Viewing and adjusting an output volume level
In the following example, the audio output volume is viewed and adjusted. The
steps show the front panel indications that result from your action.
1
.
Press and release the Esc button (figure 3-59).
C O N T R O L
PRESET
ENTER
ESC
VIEW
Press the Esc button to clear all selections.
The button flashes once.
Figure 3-59 — Clear all selections
2
.
Press and
hold
the Audio button for approximately 2 seconds (figure 3-60).
AUDIO
AUDIO
Press and hold the Audio button until it blinks.
2 seconds
= Blinking button
Figure 3-60 — Select
Audio
mode
3
.
Press and release the output 1 button (figure 3-61).
3
1 2 3
11 12
6 7 8 9 10
INPUTS
1 2 3 4 5
Press and release
the Output 1 button.
The button lights
green.
The input buttons display the selected output's audio volume level.
In this example, the
green
input buttons indicate 41.5 percent of the applied audio
input. The
unlit
input buttons indicate an audio volume
attenuation
of 39 dB.
–39 dB attenuation,
41.5% volume
= Unlit button
= Slow blinking button
S
S
= Lit button
Figure 3-61 — Select output 1
