Matrix Software, cont’d
MVX Plus 128 VGA A Matrix Switcher • Matrix Software
5-22
PRELIMINAR
Y
Master-Reset
selection
Master reset clears all ties and presets, all video and audio mutes, resets all I/O
grouping, sets all input audio levels to unity gain (+0 dB), and sets all output
volume levels to 100% (0 dB of attenuation).
N
Master reset does not reset the Internet protocol (IP) settings.
Using
Emulation
mode
Emulation mode allows you to set up the software without attaching the switcher
to the computer. To use
Emulation
mode, do the following:
1.
Double-click the MATRIX Sw Control Program icon in the Extron
Electronics group or folder.
2.
Choose
Emulate
, and click
OK
.
3.
Choose an Emulation file to open, and click
OK
. The file DEMO.MTX
provides a sample of a completed matrix setup. Selecting the file NEW.INI or
clicking
Cancel
provides a blank setup to get you started.
4.
Enter the file name under which you want to save any changes to the file, and
click
OK
.
5.
Select the number of video boards, audio boards, and matrix model for which
you are preparing a configuration, and click
OK
.
6.
Continue using the program as described on page 5-6.
Using the help system
For information about program features, you can access the help program in any of
the following ways:
• From the Extron Electronics program folder or group, double-
click on the MATRIX Switchers Help icon (shown at right).
• From within the Matrix Switcher Control Program, click on the
Help
menu on the main screen.
• From within the Matrix Switcher Control Program, press the F1 key.
Special Characters
The HTML language reserves certain characters for specific functions. The switcher
does not accept these characters as part of preset names, the switcher’s name,
passwords, or locally created file names.
The switcher rejects the following characters:
{space (spaces
are
ok for names)} + ~ , @ = ‘ [ ] { } < > ’ “ semicolon (;) colon
(:) | \ and ?.
