3-21
MVX Plus 128 VGA A Matrix Switcher • Operation
PRELIMINAR
Y
Example 5: Grouping inputs and outputs
In the following an example, several switcher inputs and outputs are assigned to
groups. The steps show the front panel indications that result from your action.
1
.
Press and release the Esc button (figure 3-28).
C O N T R O L
PRESET
ENTER
ESC
VIEW
Press the Esc button to clear all selections.
The button flashes once.
Figure 3-28 — Clear all selections
2
.
To enter
I/O Group
mode, press and
hold
the Input 1 and Output 1 buttons for
approximately 2 seconds and then release the buttons (figure 3-29).
1
1
1 2 3
3
1 2 3
Press and
hold
the Input 1
button and Output 1 button.
Release the Input 1 button
and Output 1 button.
Ungrouped input and
output buttons light.
2 seconds
Figure 3-29 — Select
I/O Group
mode
3
.
Press and release the Enter button to select group 1 (figure 3-30).
C O N T R O L
PRESET
ENTER
ESC
VIEW
Press and release the Enter button to select group 1.
The button lights amber to indicate the selection.
1
3
2
4
Group #
Figure 3-30 — Select an I/O group
N
I/O groups are protected when front panel lock mode 2 is selected. You can view
the groups in lock mode 2, but you cannot change them from the front panel.
If front panel lock mode 2 is selected and you try to perform step
4
, the actions
are ignored and the Enter, RGBHV, and Audio buttons flash.
