Extron electronics MVX Plus 128 VGA A, User Manual

Page: 28 / 162

MVX Plus 128 VGA A Matrix Switcher • Operation
3-2
Operation
PRELIMINAR
Y
Front Panel Controls and Indicators
The front panel controls (figure 3-1) are grouped into two sets. The input and
output buttons are grouped on the left side of the control panel. The control
buttons and video/audio (I/O) selection buttons are grouped on the right side of
the panel.
MVX PLUS SERIES
AUDIO VIDEO
I/O CONTROL
ENTER PRESET VIEW ESC
INPUTS
1 2 3 4 5 6 7 8 9 10 11 12
OUTPUTS
1 2 3 4 5 6 7 8
VGA MATRIX SWITCHER
WITH
IP LINK™
CONFIG
8 6 5 4 3 7
1
2
Figure 3-1 — Front panel, MVX Plus 128 VGA A
The large, illuminated pushbuttons can be labeled with text and/or graphics. The
buttons can be set to provide amber background illumination all the time or the
background illumination can be turned off (see “Background illumination”, on
page 3-43. The buttons blink or are lit at full intensity (depending on the operation)
when selected.
Definitions
The following terms, which apply to Extron matrix switchers, are used throughout
this manual:
Tie — An input-to-output connection.
Set of ties — An input tied to two or more outputs. (An output can never be tied
to more than one input.)
Configuration — One or more ties or one or more sets of ties .
Current configuration — The configuration that is currently active in the
switcher (also called configuration 0 )
Global memory preset — A configuration that has been stored. Up to 32 global
memory presets can be stored in memory. Preset locations are assigned to the
input buttons and output buttons. When a preset is retrieved from memory,
it becomes the current configuration .
The switchers have 32 presets. Up to 20 presets can be selected from the
front panel for either saving or retrieving. Preset numbers larger than 20 are
accessible via serial port or LAN port control.
Room — A subset of outputs that are logically related to each other, as
determined by the operator. The switchers support up to 10 rooms , each of
which can consist of from 1 to 16 outputs.
Room memory preset — A configuration consisting of outputs in a single room
that has been stored. When a room preset is retrieved from memory, it
becomes the current configuration .