Operation, cont’d
MVX Plus 128 VGA A Matrix Switcher • Operation
3-12
PRELIMINAR
Y
Example 2: Adding a tie to a set of video and audio ties
In the following example, a new video tie is added to the current configuration.
The steps show the front panel indications that result from your action.
N
This example assumes that you have performed example 1.
1
.
Press and release the Esc button (figure 3-9).
C O N T R O L
PRESET
ENTER
ESC
VIEW
Press the Esc button to clear all selections.
The button flashes once.
Figure 3-9 — Clear all selections
2
.
To select video only for the tie, if necessary, press and release the RGBHV
button and the Audio button (figure 3-10).
I / O
RGBHV AUDIO
Press the RGBHV button to toggle on and off.
The button lights
green
when selected.
Press the Audio button to toggle on and off.
The button is
unlit
or
background illuminated
when deselected.
Figure 3-10 — Select RGBHV only
3
.
Press and release the input 5 button (figure 3-11).
INPUTS
1 2 3 4 5 6 7 8 9
OUTPUTS
1 2 3 4 5 6 7 8
Press and release the Input 5 button.
The button lights
green
to indicate that
RGBHV
outputs can be tied to or untied from this input.
The Output 3, Output 4, and Output 8 buttons light
green
to indicate the
RGBHV
ties created in example 1.
Figure 3-11 — Select an input
4
.
Press and release the output 1 button (figure 3-12).
C O N T R O L
PRESET
ENTER
= Blinking button
ESC
VIEW
INPUTS
1 2 3 4 5 6 7 8 9
Press and release the Output 1 button.
The button blinks
green
to indicate that only the selected
RGBHV
input will be tied to this output.
The Enter button blinks
green
to indicate the need to
confirm the change.
Figure 3-12 — Select the output
