3-55
MTPX Plus Twisted Pair Matrix Switchers • Operation
Optimizing the Audio
Each local input’s audio level can be adjusted within a range of -18 dB to +24 dB,
so there are no noticeable volume differences between sources and for the best
headroom and signal-to-noise ratio. Each local audio output’s volume can be
adjusted from full loudness to effectively muted. Adjust the levels as follows:
1
.
Connect audio sources to all desired inputs and connect the local audio
outputs to output devices such as audio players. See “Signal inputs”, in
chapter 2, “Installation”. For best results, wire all of the inputs and the
outputs balanced.
2
.
Power on the audio sources, the switcher, and the audio players.
3
.
Switch among the inputs (see “Creating a configuration”, in this chapter),
listening to the audio with a critical ear or measuring the output audio level
with test equipment, such as a VU meter.
4
.
As necessary, adjust the input audio level of each input (see “Viewing and
adjusting the TP input audio level”, on page 3-34) so that the approximate
output level is the same for all selected inputs.
5
.
Tie an audio input to each local audio output.
6
.
As necessary, adjust the output audio level of each output (see “Viewing and
adjusting the local output volume”, on page 3-40).
Video Adjustments
Image adjustments are available via SIS commands, the Windows-based control
program, and the built-in HTML pages. See “Optimizing the Video”, in chapter 5,
“Matrix Software”.
Troubleshooting
This section gives recommendations on what to do if you have problems operating
the switcher.
1
.
Ensure that all devices are plugged in and powered on. The switcher is
receiving power if one of the front panel Power Supply LEDs is lit green.
2
.
Check to see if one or more outputs are muted.
3
.
Ensure an active input is selected for output on the switcher.
4
.
Ensure that the proper signal format is supplied.
5
.
Check the cabling and make corrections as necessary.
6
.
Call the Extron S
3
Sales & Technical Support Hotline if necessary. See the rear
cover of this manual for the phone number in your region of the world.
Summary of Contents for MTPX Plus Series
