Extron electronics MTPX Plus Series, User Manual

Page: 114 / 190

Programmer’s Guide, cont’d
MTPX Plus Twisted Pair Matrix Switchers • Programmer’s Guide
4-20
Command/response table for SIS commands (continued)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
View ties, gain, volume, mutes, presets, and DIP switch status (continued)
View audio global preset
configuration
EX2)
*
X@
*2VC
} X!
n
•
X!
n +1
•...•
X!
n +15
•Aud
]
Show preset
X2)
’s audio
configuration. Show the
input tied to 16 sequential
outputs, starting from output
X@
.
Command description:
Response description:
preset #*starting output # (StO#)*2(=audio) VC
input # (I#) tied to StO#•I# tied to StO#+1•I# tied to StO#+2• ... •I# tied to StO#15• Aud
]
N The starting output number (
X@
) should always be “1” for matrix sizes of 16 outputs or smaller.
N
EX2)
*1*2VC
}
where
X2)
= 0 returns the switcher’s current audio configuration.
Example:
(MTPX Plus 1632)
E
15*17*2VC
}
17 Output:
Response = tied input:
input 1 tied to output 3
18 19 20 21 22 23 24
01•01•01•01•02•12•12•00•00•00•00•00•01•08•15•16•Aud
25 26 27 28 29 30 31 32
no tied input
Each position shown in the response is an output: left = starting output (17), right =
starting 15 (32). The number in each position is the input tied to that output.
In this example, preset 15, audio input 1 is tied to outputs 17, 18, 19, 20, and 29; input 2 is
tied to output 21; input 12 is tied to outputs 22 and 23; input 8 is tied to output 30; input
15 is tied to output 31; and input 16 is tied to output 32. No input is tied to output 24, 25,
26, 27, and 28.
View video room preset
configuration
EX2@
*
X2)
*1*1VC
} X!
n
•
X!
n +1
•...•
X!
n +15
•Vid
]
Show room
X2@
, preset
X2)
’s
video configuration. Show
the input tied to up to 16
outputs assigned to room
X2@
.
Command description:
Response description:
room #*room preset #*starting output # (StO#)* 1 (=video) VC
input # (I#) tied to StO•I# tied to StO#+1•I# tied to StO#+2• ... •I# tied to StO#+15• Vid
]
N The starting output number (
X@
) should always be “1” for matrix sizes of 16 outputs or smaller.
View audio room preset
configuration
EX2@
*
X2)
*1*2VC
} X!
n
•
X!
n +1
•...•
X!
n +15
•Aud
]
Show room
X2@
, preset
X2)
’s
audio configuration. Show
the input tied to up to 16
outputs assigned to room
X2@
.
Command description:
Response description:
room #*room preset #*starting output # (StO#)*
2
(=audio)
VC
input # (I#) tied to StO•I# tied to StO#+1•I# tied to StO#+2• ... •I# tied to StO#+15• Aud
]
N
The starting output number (
X@
) should always be “1” for matrix sizes of 16 outputs or smaller.
N
X2)
= Global or room preset # 0 - 32, 10 maximum for a room preset (0 = current configuration)
X@
= Output number 01 – 32
X!
= Input number 00 – (maximum number of inputs for your model)
X2@
= Room # (for room presets) 10 max. (each can have up to 10 presets (
X2)
s) assigned)