Extron electronics MKP 2000, User Manual

Page: 40 / 56

MKP 2000 • Remote Control 32
Command ASCII Command
(host to unit) Response
(unit to host) Additional Description
Clear target password E
• PI
}
Spw •
]
Query target password E
PI
}
****
]
NOTE: The retuned value for the read target password command (
E
PI
}
) is masked; the value is either empty (no return
other than the ) if no switcher password is assigned, or four asterisks ( ****
]
) if a password is assigned.
Set DNS server IP address E X2!
DI
}
Ipd •
X2!]
Query DNS server IP address E
DI
} X2!]
Query connection listing
E
CC
}
{ number of connections }
]
Set administrator password E X2$
CA
}
Ipa •
X2$]
Clear administrator password E
•
CA
}
Ipa
•
]
Query administrator
password E
CA
} X2$ ]
NOTE: You must have an administrator password assigned before you can assign a user password.
Set user password E X2$
CU
}
Ipu •
X2$]
Clear user password E
• CU
}
Ipu •
]
Query user password E
CU
} X2$]
NOTE: When you have connected multiple MKPs to control a switcher through a primary MKP control panel, do not set a
user password on the primary MKP.
Switch web page priority
E X2%
Cpag
}
Iwp •
X2%]
Query web page priority E
Cpag
} X2%]
Set verbose mode E X(
CV
}
Vrb •
X(
] Set MKP to report changes from
other sources.
Query verbose mode E
CV
} X!]
Query connection security
level E
CK
} X1)]
KEY:
X!
= On/off status 0 = off/disable, 1 = on/enable
X(
= Verbose/response mode 0 = clear/none assigned (default), 1 = verbose mode, 2 = tagged responses for
queries, 3 = 1 and 2 (verbose and tagged)
X1)
= Security level 0 = clear/none, 11 = user password assigned, 12 = administrator password assigned
X2)
= Daylight Savings Time 0 = Daylight Savings Time off/ignore, 1 = Daylight Savings Time on (northern hemisphere),
2 = Daylight Savings Time on (Europe), 3 = Daylight Savings Time on (Brazil)
X2!
= IP Address ( xxx.xxx.xxx.xxx )
X2$
= Password 12 digits, alphanumeric
X2%
= Web page priority 0 = Internal (default on power up), 1 = User