Extron electronics MKP 2000, User Manual

Page: 16 / 56

MKP 2000 • Installation 8
MK
P 2
000
4
5
6 1
2
3
7
8
9
BA
CK
0
CA
NC
EL
INP
UT
OU
TPU
T
TAK
E
R
Detail A
0.75" #6-32 Screw
Backing Clip
Backing Clip
Sheet Rock
Sheet Rock
Mounting Bracket
Mounting Bracket
Detail B
1.25" #6-32 Screw
Backing clip can
be in either orientation.
See Detail A or Detail B.
Extron
MKP 2000
Figure 5. Attaching a Mud Ring to a Wall
•
If using a wall box, insert the wall box into the opening; and attach it to the wall stud
or furniture with nails or screws, leaving the front edge flush with the outer wall or
furniture surface (see figure 6).
•
If attaching the wall box to wood, use four #8 or #10 screws or 10-penny nails. A
minimum of ½ inch (1.3 cm) of screw threads must penetrate the wood.
•
If attaching the wall box to metal studs or furniture, use four #8 or #10 self-tapping
sheet metal screws or machine bolts with matching nuts.
Flush with
Wall Surface
Screws or Nails
Wall Stud
Wall Box
Figure 6. Attaching a Wall Box to a Wall Stud
8. Connect the Ethernet cable, RS-232 cable, or both cables (as appropriate) and the
power cable, and test the MKP before fastening the control panel into the wall box (see
Rear Panel and Side Panel Connections on page 9 for details).
NOTE: The rear panel connectors will be inaccessible after installation.
figure 5
figure 6