Extron electronics MKP 2000, User Manual

Page: 27 / 56

MKP 2000 • Operation 19
INPUT OUTPUT
TAKE
1 9 2
Simultaneously press and hold
the Input, Output, and Take
buttons for 2 seconds.
Release
the buttons.
The LED display shows the
most-significant octet of the
MKP 2000 IP address.
Figure 18. Selecting Setup Mode
•
Press the
Input
button to change the value shown in the LED display, cycling
through the various IP addresses and the host control settings (see figure 19).
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
MKP 2000
IP Address
MKP 2000
Subnet Mask
MKP 2000
Gateway
Address
Matrix
Switcher
IP Address
Connection
Priority
Host Control
Setting
The Input and Output
LEDs blink or light
steadily to indicate
the value shown in
the LED display.
= Unlit LED
= Lit LED
= Blinking LED
Figure 19. Selecting Different Addresses
•
Press the
Output
button to change the octet of the selected IP address that
is shown in the LED display, or to switch between host control and primary or
secondary settings (see figure 20).
Press
OUTPUT
Press
OUTPUT
Press
OUTPUT
Press
OUTPUT
1 9 2 1 6 8 . 2 5 4 . 2 5 3 .
The LED display
shows the IP
address’s first octet. The LED display
shows the
second octet. The LED display
shows the third
octet. The LED display
shows the fourth
octet.
No dot Dot Dot Dot
Figure 20. Selecting Octet Fields
NOTE: The position or absence of a dot (period) in the display indicates the
octet that is displayed. In the example in figure 20, the IP address is the MKP
default address,
192.168.254.253
. Each octet of an IP address can be
edited when it is displayed.
figure 18
figure 19
figure 20