HTML Operation, cont’d
ISM 824 Integration Scaling Multiswitcher • HTML Operation
6-4
Configuration Pages
Click on the Configuration tab, to download the ISM’s configuration pages. These
pages gives access to the system settings, ISM settings, passwords, email settings,
and to the Firmware Upgrade facility. All the pages within the Configuration
series have fields which can be edited to allow changes to the system settings, the
unit settings, administration settings, and to select firmware to upgrade the unit.
Individual configuration pages can be accessed by clicking the appropriate link in
the column on the left side of the page.
The initial screen displayed shows the System Settings page (see figure 6-3).
Figure 6-3
—
Configuration — System Settings
System Settings page – IP Settings fields
The IP Settings fields provide a location for viewing and editing settings unique
to the ISM/Ethernet interface. After editing any of the settings on this page, click
Submit
at the bottom of the section. The screen refreshes and the unit is updated.
N
If an error is made during field editing and
before
submitting, click
Cancel
.
The screen refreshes with the previous entries. The unit is not updated.
Some fields are not changeable
Unit Name field
The Unit Name field contains the name used as the “from” information when the
switcher e-mails alerts. This name field can be changed to any valid name, up to
24 alphanumeric characters.
N
The following characters are invalid in the name:
+ ~ , @ = ‘ [ ] { } < > ’ “ ; : | \ and ?.
Summary of Contents for ISM 824
Page 1: ...ISM 824 Integration Scaling Multiswitcher 68 1123 01 Rev A 02 08...
Page 4: ...ISM 824 Integration Scaling Multiswitcher ii...
Page 22: ...Introduction cont d ISM 824 Integration Scaling Multiswitcher Introduction 1 8...
Page 158: ...Ethernet Connection cont d A 8 ISM 824 Integrated Scaling Multiswitcher Reference Information...
