6-19
ISM 824 Integration Scaling Multiswitcher • HTML Operation
Video Scaler — ISM VS
The page for the Video Scaler is shown below:
Figure 6-18 — Video Scaler output card configuration screen
On the top of this page, the input number that is currently tied to the card’s output
tie is shown (see figure 6-18).
Also from this page adjustments to the following can be made;
• picture controls (color, tint, contrast, brightness, detail, horizontal and vertical
position and size, and zoom)
• user and input presets can be saved and/or recalled
• output configuration parameters (resolution, refresh rate, sync format, and
polarity) can be changed
• advanced configuration settings (top and bottom blanking settings, blue mode,
2:2 pull down, edge smoothing filter, enhancement mode, auto memory, and
auto image) can be turned on or off.
To make picture adjustments do the following:
1
.
Within the Picture Controls section, select the setting that is to be changed,
and click on either the left arrow (<) to decrease the value, or on the right
arrow (>) to increase the value, one step at a time. After every click the page
refreshes and shows the new value. The device is updated to the new setting.
N
Alternatively, if the new setting value is known, enter it directly into the field,
and press enter. The page refreshes, shows the new value, and the device is
updated.
Summary of Contents for ISM 824
Page 1: ...ISM 824 Integration Scaling Multiswitcher 68 1123 01 Rev A 02 08...
Page 4: ...ISM 824 Integration Scaling Multiswitcher ii...
Page 22: ...Introduction cont d ISM 824 Integration Scaling Multiswitcher Introduction 1 8...
Page 158: ...Ethernet Connection cont d A 8 ISM 824 Integrated Scaling Multiswitcher Reference Information...
