A-3
ISM 824 Integrated Scaling Multiswitcher • Reference Information
Ping the switcher as follows:
1
.
On the Windows task bar, click Start > Run.
2
.
At the Open prompt, type
command.
3
.
Click the OK button.
4
.
At the DOS prompt, type
ping {IP address}
and then press Enter. The computer
returns a display similar to figure A-2.
The line
Pinging ...
reports the actual numeric IP address, regardless of
whether you entered the actual numeric IP address or an alias name.
Figure A-2 — Ping response
Ping to determine Web IP address
The Ping utility has a modifier,
-a
, that directs the command to return the Web
address rather than the numeric IP address.
At the DOS prompt, type
ping -a {IP address}
and then press Enter. The computer’s
return display is similar to the Ping response shown in figure A-2, except that when
you specify the
-a
modifier, the line
Pinging mail...
reports the web IP address
rather than the numeric IP address, regardless of whether you entered the actual
numeric IP address or an alias name.
Connect as a Telnet client
The Microsoft Telnet utility is available from the DOS prompt. Telnet allows you to
input SIS commands to the ISM 824 from the PC via the Ethernet link and the LAN.
Access the DOS prompt and start Telnet as follows:
1
.
On the Windows task bar, click Start > Run.
2
.
At the Open prompt, type
command
.
3
.
Click on the OK button.
4
.
At the DOS prompt, type
telnet
and then press Enter. The computer returns a
display similar to figure A-3.
Summary of Contents for ISM 824
Page 1: ...ISM 824 Integration Scaling Multiswitcher 68 1123 01 Rev A 02 08...
Page 4: ...ISM 824 Integration Scaling Multiswitcher ii...
Page 22: ...Introduction cont d ISM 824 Integration Scaling Multiswitcher Introduction 1 8...
Page 158: ...Ethernet Connection cont d A 8 ISM 824 Integrated Scaling Multiswitcher Reference Information...
