6-3
ISM 824 Integration Scaling Multiswitcher • HTML Operation
•
Is there a file in the switcher’s memory that is named “index.html”?
If so
, the switcher downloads “index.html” as the default startup page.
•
If neither of the above conditions is true
, the switcher downloads the
factory-installed default startup page, “nortxe_index.html” (figure 6-2),
the System Status page.
N
On password-protected connections, there are two levels of protection:
administrator and user.
Administrators have full access to all pages described in this chapter and all
switching capabilities and editing functions.
When you are logged on as a user, only the Status and Control tabs are shown
on the Web pages.
System Status Page
The System Status page (figure 6-2) provides an overall view of the status of the
ISM 824 multiswitcher, including firmware versions, output cards installed, and
serial port settings. The System Status page is the default page that the switcher
downloads when you connect to the switcher. To access this page while viewing
any other page, click the
Status
tab.
Figure 6-2
—
System Status page
The System Status page does not automatically update. If you want to see an
update, click the Refresh button on your Web browser.
Summary of Contents for ISM 824
Page 1: ...ISM 824 Integration Scaling Multiswitcher 68 1123 01 Rev A 02 08...
Page 4: ...ISM 824 Integration Scaling Multiswitcher ii...
Page 22: ...Introduction cont d ISM 824 Integration Scaling Multiswitcher Introduction 1 8...
Page 158: ...Ethernet Connection cont d A 8 ISM 824 Integrated Scaling Multiswitcher Reference Information...
