HTML Operation, cont’d
ISM 824 Integration Scaling Multiswitcher • HTML Operation
6-10
3
.
Enter a user name and a password in the User Name and Password fields.
For the ISM to accept their e-mail messages, senders must enter the user name
and password.
N
For the User name, any combination of letters, numerals, spaces, and
symbols
except
the comma (
,
) and the single and double quotation marks
(
‘
and
“
) can be used. For the password, all characters except the comma can be
used. The user name and password can each be from 1 to 30 characters.
N
Both
a user name and a password must be specified.
4
.
Click
Save
to save the user name and password.
To remove SMTP authorization, click
Edit
, click (deselect) the SMTP Authorization
Required check box, then click
Save
.
Firmware Upgrade page
To access the Firmware Upgrade page (figure 6-8) by click on the Firmware
Upgrade link on the left side of any of the Configuration pages.
Figure 6-8
—
Firmware Upgrade page
The Firmware Upgrade page provides a way to replace the firmware that is coded
on the switcher’s control board without taking the switcher out of service, opening
the switcher enclosure, and replacing the firmware chip.
N
The Firmware Upgrade page is
only
for replacing the firmware that controls all
switcher operation. To insert your own HTML pages,
To upgrade the ISM 824 multiswitcher’s firmware, the latest firmware version has
to be downloaded to the host PC from the Extron web site (
).
To download the firmware to the host PC, do the following:
1
.
Visit the Extron web site,
Download
tab.
Summary of Contents for ISM 824
Page 1: ...ISM 824 Integration Scaling Multiswitcher 68 1123 01 Rev A 02 08...
Page 4: ...ISM 824 Integration Scaling Multiswitcher ii...
Page 22: ...Introduction cont d ISM 824 Integration Scaling Multiswitcher Introduction 1 8...
Page 158: ...Ethernet Connection cont d A 8 ISM 824 Integrated Scaling Multiswitcher Reference Information...
