5
Mounting to rack rails using a ZipClip
1. Fasten the ZipClip 200 mounting clip to a rack rail using
two rack screws as shown in the diagram below.
2. Insert the bottom of the EXP down into the clip, starting
with one end.
3. Pivot the other end toward the clip and press until the
clip snaps into place.
Inside
Rack
Side of Rack
ZipClip 200
Back of
Rack
Furniture mounting
NOTE:
The ZipClip is shipped with a set of four wood
screws.
1. Attach the ZipClip to the mounting surface using two or
more wood screws (see
1
below). Make sure the clip
is oriented with the appropriate side facing the
mounting surface of the furniture and with the tab
accessible from the
front of the
furniture.
2. Insert the EXP into the ZipClip
2
as described
previously and press to snap it into place.
IPL EXP 200
2
1
Under a Desk
