IN1604 DTP and IN1604 HD Scalers • Configuration Software
62
Output Configuration panel
The
Output Configuration
panel contains controls for output resolution and rate, format
settings, switch transitions, and available test pattern selections.
Figure 43.
Output Configuration
To configure the output, perform the following:
1.
From the
Resolution
drop-down menu (
1
), select the desired output resolution.
2.
From the
Refresh Rate
drop-down menu (
2
), select the desired refresh rate.
3.
From the
HDMI
drop-down menu (
3
), select the desired output format.
4.
In the
Switch Transitions
panel (
4
), select one of the following radio buttons:
•
Fade Through Black
— Fades video to a black screen before switching to the
newly selected video.
•
Cut
— Switches video directly to the newly selected input.
5.
To aid display device setup and optimization, select a test pattern from the drop-down
menu (
5
) in the
Test Patterns
panel.
Crop
Alternating Pixels
Crosshatch
Color Bars
Grayscale
Blue Mode
Audio Test
Figure 44.
Available Test Patterns
NOTE:
No input signal is needed when using a test pattern for display device setup.
