manualshive.com logo in svg

Extron electronics IN1604 DT, User Manual

Share
Download
Extron electronics IN1604 DT User Manual Download Page 30

 

IN1604 DTP and IN1604 HD Scalers • Operation

24

Audio Submenu

Figure 16. 

Audio Submenu

The 

Audio

 submenu allows adjustment of audio settings, including mute, input format, gain 

and attenuation, output format, and volume.

Audio Mute

 — Press the navigation buttons to globally mute or unmute audio output.

Audio Format

 — Press the navigation buttons to select the audio input format. Input 1 

can only be set to 

None

, 

Analog 1

, or 

Analog 2

. Inputs 2-4 can be set for any audio input 

format (see the table below for a description of the formats).

Format

Details

Inputs

None

Mutes audio for the selected input. Sets “No Audio” EDID.

All

Analog 1

Sets the selected input to analog input 1. Sets “No Audio” EDID.

All

Analog 2

Sets the selected input to analog input 2. Sets “No Audio” EDID.

All

LPCM-2Ch

Sets the selected input to LPCM-2Ch audio. Sets 2Ch audio EDID.

2-4

Multi-Ch

Sets the selected input to Multi-Ch audio. Sets Multi-Ch audio EDID.

2-4

LPCM-2Ch Auto 
(Analog 1)

Sets the selected input prioritize 2-channel LPCM audio. Audio on analog input 1 
is passed when 2-channel LPCM audio is not present. Sets 2Ch audio EDID.

2-4

Multi-Ch Auto 
(Analog 1)

Sets the selected input to prioritize multi-channel audio, but will pass 2-channel 
LPCM if multi-channel audio is not available. Audio from analog input 1 is passed 
when digital is not present. Sets Multi-Ch audio EDID.

2-4

LPCM-2Ch Auto 
(Analog 2)

Sets the selected input prioritize 2-channel LPCM audio. Audio on analog input 2 
is passed when 2-channel LPCM audio is not present. Sets 2Ch audio EDID.

2-4

Multi-Ch Auto 
(Analog 2)

Sets the selected input prioritize multi-channel audio, but will pass 2-channel 
LPCM if multi-channel audio is not available. Audio on analog input 2 is passed 
when digital audio is not present. Sets 2Ch audio EDID.

2-4

Analog Gain and Attenuation

 — Press the navigation buttons to set the gain (in dB) for 

the applicable analog input.

Output Format

 — Press the navigation buttons to set the output format.

Output Volume

 — Press the navigation buttons to set the audio output volume.

Summary of Contents for IN1604 DT























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands