IN1604 DTP and IN1604 HD Scalers • Operation
16
To navigate the OSD menu:
1.
Press the
Up
or
Down
button to navigate the nine submenus. The following table shows
the nine submenus and their respective submenu items.
Submenus
Submenu Items
Quick Setup
Auto-Image
Input Format
EDID
Audio
Output
Resolution
Aspect Ratio
Audio Mute
Test Pattern
User Presets
Recall
Save
Clear
Picture Controls
Image
Position
Image Size
Brightness/
Contrast
Color/Tint
Detail
Input
Auto-Image
Input Format
Film Mode
Horizontal/
Vertical Start
Horizontal/
Vertical
Active
Total Pixels/
Phase
HDCP
Authorization
EDID
Output
Output
Resolution
HDMI Format
HDCP
Notification
Audio
Audio Mute
Audio Format
Analog Gain/
Attenuation
Output
Format
Output
Volume
Advanced
Test Pattern
Screen
Saver/
Timeout
Auto-Image
Aspect Ratio
Auto Memory
Overscan
Auto Switch
Factory
Reset
Communication
Remote Port
Contact
Mute/
Tally LED
Device Info
(Read Only)
Temperature
Input
Information
Output
Information
HDCP Status
Display
Information
Firmware
Version
2.
Press the
Enter
or
Right
button to open submenu items.
3.
Press the
Up
or
Down
button to navigate the submenu items.
4.
Press the
Menu
button to exit a submenu item or return to the previous submenu.
To adjust a submenu item:
1.
Navigate to an adjustable item and press the
Enter
or
Right
button to select the
submenu item.
2.
Press the
Left
or
Right
button to select a submenu item or a specific adjustable
setting within the selected submenu item.
If the selected submenu item has multiple adjustable settings, press the
Up
or
Down
button to select a value.
3.
Press the
Enter
button to accept the new value.
Press the
Menu
button to cancel any pending changes.
To exit the OSD menu:
Hold the
Menu
button for 3 seconds to exit the OSD menu.
