IN1604 DTP and IN1604 HD Scalers • SIS Configuration and Control
32
X2*
= Screen saver mode
1
= black output (default)
2
= blue output with OSD text
X2(
= Video output mute
0
= unmute
1
= mute video
2
= mute video and sync
X3)
= Auto-Image threshold value
0-100
(where
0
= black and
100
= white;
025
= default)
X3!
= HDCP status
0
= no sink or source device detected
1
= sink or source detected with HDCP
2
= sink or source detected but no HDCP
X3@
= Video switching effect
0
= cut
1
= fade through black (default)
X3#
= HDCP mode
0
= HDMI outputs are always authenticated,
but only encrypted when required
1
= HDMI outputs are always authenticated and
encrypted
2
= HDMI outputs are always authenticated,
but only encrypted when required, with
continuous DVI trials
3
= HDMI outputs are always authenticated and
encrypted, with continuous DVI trials
X3$
= TMDS output format
0
= auto (based on the display EDID: default)
1
= DVI RGB 444
2
= HDMI RGB “Full”
3
= HDMI RGB “Limited”
4
= HDMI YUV 444 “Full”
5
= HDMI YUV 444 “Limited”
6
= HDMI YUV 422 “Full”
7
= HDMI YUV 422 “Limited”
X3%
= Auto switch mode
0
= disable
1
= prioritizes the highest numbered active input
2
= prioritizes the lowest numbered active input
X3^
= Audio volume
-100
to
0
in 1 dB steps (where
-100
= -100 DB
and
0
= 0 dB;
-10
= default)
X3&
= Audio output format
1
= dual mono
2
= stereo (default)
X3*
= Audio input gain
-18
to
+24
in dB (
0
= default)
X3(
= Audio input format
0
= none (input muted)
1
= analog 1 (TRS)
2
= analog 2 (captive screw)
3
= LPCM-2Ch digital
4
= Multi-Ch digital
5
= LPCM-2Ch digital auto (analog 1)
6
= Multi-Ch digital auto (analog 1)
7
= LPCM-2Ch digital auto (analog 2)
8
= Multi-Ch digital auto (analog 2)
X4)
= EDID file
128 or 256 bytes of binary data
X4!
= Video signal status
0
= video or HDMI signal not detected
1
= video or HDMI signal detected
X4@
= Power Save mode
0
= full power mode (default)
1
= lower power state
