Extron electronics HC 404, User Manual

Page: 60 / 73

HC 404 System • Software-based Configuration and Control 52
Basic Control Configuration
NOTE: GC projects can be created offline and uploaded to the hardware at a later date.
Follow the steps in Setup Checklist: How to Proceed With Installation starting on
page 5. The overall process for setting up the control functions of the HCR 102 receiver
is as follows:
Configure the IP settings of
the HCR 102 and any optional
TouchLink Pro touchpanels.
See
Network
Communication Setup
in this guide.
Create GUI layouts for the
touchpanels or other interfaces:
1. Start GUI Designer.
2. Create GUI layout designs for each
TouchLink Pro touchpanel.
3. Save and build the GUI layout file.
Or. ..
Download existing GUI layouts
from identical touchpanels.
Create monitors, schedules, timers,
macros, and local variables.
Add touchpanels (if used)
to the project.
Configure ports on the
HCR 102.
Import GUI layouts and
configure the touchpanels.
Test the system, make adjustments,
finalize configuration.
Save the project.
Build and upload the configuration to
the HCR 102.
If desired or required, install a new
security certificate (via Toolbelt).
Will
TouchLink Pro
touchpanels be
used?
No Yes
Create a new GC Professional or GC Plus project
and add the HCR 102 to it.
Within Global Configurator
(GC Professional or
GC Plus mode):
Figure 24. Overall Control Configuration Steps
Network
Communication Setup