Extron electronics HC 404 User Manual Download Page 13

Page: 13 / 73

HC 404 System • Hardware Features and Installation

Hardware Features
and Installation

This section covers the following material:

•

Setup Checklist: How to Proceed With Installation

•

Network Communication Setup

•

Front Panel Features

•

Rear Panel Features and Connections

•

Resetting the Unit Manually or Via Software

Pay careful attention to the order and types of setup tasks. Follow the setup checklist in
this guide or in the setup guide. It is helpful to keep it with you for reference throughout the
installation and configuration process.

Setup Checklist: How to Proceed With Installation

Step 1 — Get Ready

Familiarize yourself with the features of the HC 404 system (see

Front Panel Features

on page 8 and

Rear Panel Features and Connections

on page 10) and of any

optional TouchLink Pro touchpanels that will be part of the system.

Download and install the latest version of the following:

•

PCS product configuration software

— for detecting and configuring the AV

settings for the transmitter-receiver pair, for configuring basic network settings, and
for updating firmware

•

Toolbelt software

— for discovering the HCR 102 receiver and other control

products on the network, for managing core settings, and for upgrading firmware

•

Global Configurator (GC) software

— for setting up and configuring the control

system. GC Professional and GC Plus modes include the

Toolbelt

feature.

•

GUI Designer software

— for designing layouts for Extron TouchLink Pro

touchpanels and third-party touch interfaces

•

IP Link Pro device drivers

— for use with GC, to make control of other AV

devices possible

All are avail able from

www.extron.com

(see

Locating Software, Firmware, and

Driver Files on the Extron Website

on page 46).

Obtain network information for the unit from the network administrator. You will need the
following details for each

HCR 102

receiver and for any other Extron Pro control product

that is part of the system:

DHCP setting (on or off)

Gateway IP address

Device (

HCR 102, optional TLP Pro touchpanels

)

IP address

Username

Subnet mask

Passwords

Summary of Contents for HC 404










































































Search results

Summary of Contents for HC 404

Reviews:

Related manuals for HC 404

Brands by name

Popular brands

Extron electronics HC 404, User Manual

Search results

Summary of Contents for HC 404

Reviews:

Related manuals for HC 404

Brands by name

Popular brands