HC 404 System • Software-based Configuration and Control
49
3.
If this is the first time you connect the HCR 102 to PCS, an
EDID Minder
library
dialog box (shown in the figure below) opens to ask you to either locate an existing set
of EDID settings or to create a new EDID library for the unit.
Figure 22.
The EDID Minder Library Dialog Box
Either browse to and select an existing EDID file (.bin file type), then click the
Open
button, or click the
Create New
button. The
EDID Minder
dialog box closes.
An HCR 102-specific tab and
Input/Output Configuration
page open, showing the
settings of the connected HCR 102 and its HCT 103, if detected.
Figure 23.
The HCR 102
Input/Output Configuration
Page Within PCS Software